CNC bending machine is a kind of forging machinery, which is mainly used in the metal processing industry. The CNC bending machine die is made up of many parts. Therefore, when installing, we must check the status of the equipment and strictly follow the steps. At the same time, we should pay attention to the safety and the installation process of the CNC bending machine when installing and debugging. So, what are the matters needing attention in the process of installation and debugging of the NC bending machine die?

1, machine adjustment, before installation, we must first adjust the machine performance, this process must be patient and careful to see whether the machine is dusty and used iron scraps, and so on, to carry out the necessary cleaning, in order to reduce the later trouble.

2, adjust the slider stroke, pay attention to check the thickness of the mold, and pay attention to check the proportion of the upper and lower modules. Is it normal? Normally, the module must be controlled at the switch point of the travel line.

3, travel module adjustment, which is aimed at the limit point module is adjusted in time to the highest point of the module, the switch is set up, and set aside the stop position of the slider, also to deceleration in the downlink module, to protect the machine and die better.

4. The gap adjustment is mainly to measure the distance between the upper module and the lower module, and the specific clearance is set according to the folded plate.

5, the adjustment of the angle, there is a certain relationship between the angle adjustment with the product, generally 90 degree folding die, then the middle angle must be greater than the both sides of the angle, then it can be adjusted according to the tightness of the screw, the bending time can be performed via the pressure sheet adjustment, avoid mold collapse blade.